MAIN

Home
About Us
Contact Us
Info Links
Bargain Barn
Catalog

 

APPLICATION

Sprayers
Liquid Fertilizer Equip
NH3 Equipment
Dry Fertilizer Equip
Controllers
GPS/Precision Ag
Foam Markers
Nurse Trailers
Tanks
Lawn/Utility
Parts

 

GRAIN

Rem Vacs
Wagons/Carts
Augers/Conveyors
Seed Tenders

 

Other

Attachments
Rock Pickers
Tillage
Hay Equipment
Fruit & Veg Equipment
Fuel Carts
Toolboxes
Snow Equipment

 

Spreaders

NEW! Loftness RC800

With a single-axle design and 44-inch clearance, the RC800 Fertilizer Spreader is ideally engineered for row crop applications. SPREAD IS UP TO 90'!

The RC800 comes equipped with a positive mechanical conveyor drive, which eliminates the slippage problems of competitive friction wheel drives. It can also be fitted with an optional hydraulic conveyor drive, which delivers a total overlapping trapezoidal pattern of up to 90 feet and offers variable rate applications.

Variable Rate Ready

Precision Applications: An optional hydraulic conveyor belt drive can increase or decrease the fertilizer feed rate on the go. A prescription load rate can be written into your monitor to control how much fertilizer should be applied to each part of the field. If one area needs more nitrogen than another, for instance, the fertilizer rate will adjust automatically according to the GPS position.

 

 

FRAME CLEARANCE
A 44-inch frame clearance for in-season applications allows operators to spoon-feed nutrients as the crop needs them.

 

 

SPREAD PATTERN
Dual stainless steel spinners deliver a total overlapping trapezoidal pattern of up to 90 feet with an optional hydraulic drive. The standard 540 rpm PTO spinner drive produces a 50-foot pattern, as does the optional 540/1,000 rpm PTO drive.
 

 

ADJUSTABLE TREAD WIDTH
The RC800 includes a variable tread width from 80 to 120 inches to accommodate virtually any row spacing.
 

 

OBSTRUCTION FREE INTERIOR
The hopper is smooth with minimal flat surfaces and no internal gussets or plates to accumulate fertilizer. This results in a much cleaner system that helps prevent corrosion.

 

   

MECHANICAL APRON DRIVE
A mechanically driven drive eliminates the slippage problems of competitive friction wheel drives. They can also be equipped with an optional hydraulic conveyor drive for variable rate applications.
 

 

SIMPLE BEARING DESIGN
One bearing part number for all driveline components on the machine greatly simplifies the maintenance and replacement process.

 

   

SPLIT SPROCKET
Allows for easy in-field replacement of worn sprockets without removal of the wheel.

 

 

ADJUSTABLE HITCH
The hitch has a moveable clevis to accommodate a wider range of drawbar heights, and allows for leveling of the spreader. The hitch is also integral to the frame, while the suspension pulls from the hitch lowering the amount of frame stress.

 

INTEGRAL LIGHTS
Sealed and rubber isolated lights are tucked neatly inside the frame.
 

 

OPTIONS:

  CONVEYOR DRIVE
An optional hydraulic drive replaces the standard two-speed mechanical drive, and offers on-the-go rate variability to fine tune fertilizer application.
  SPINNER DRIVE
The standard PTO spinner drive can be replaced with either a 540/1,000 rpm dual-drive PTO or hydraulic drive.
  TIRES
Standard tires on the RC800 are 380/90-R46, however they can be optioned out for 480/80R42 tires.
  ROLL TARP
An optional roll tarp can be installed to protect material within the hopper from weather elements.
   




 

 

 

____________________________________________________

NESSA Inc.

73747 130th Street

Zearing, Iowa 50278

Phone: (641) 487-7608     Fax: (641) 487-7606

Email: info@nessainc.com