Schulte Snow Removal Equipment
Schulte Snow Blowers are tough enough for commercial and industrial operations as well as on the farm. Check out the models below and call us to ask about our stock and to get your best price!
Schulte RDX-117 Snow Blower
- The RDX-117 Rotating drum allows snow to be ejected out left or right side or center chute.
- The Schulte’s RDX-117 incorporates a 38” Five paddle open center cupped style fan which improves performance and is larger than most competitive designs on the market.
- On the RDX-117, a 1000 RPM gear driven drive system is standard.
- A size 8 Bondioli power shaft is included with shear pin protection to power the blower.
- A Bondioli Italian made one piece gearbox drives this unit.
- A heavily reinforced 23” bottom auger with formed struts ensures that hard chunks of snow and ice are fed into the fan with ease.
- This large open bottom auger also allows the snow blower to cut into hard pack snow where other snow blowers have difficulty.
- A 300° rotating chute design includes a UHMW bearing area to reduce chute freeze up.
- Double deflector design reduces blowback when chute deflector is placed in down position.
- A hydraulic cylinder for adjusting the chute deflector is standard.
Cutting Width
117” (2.97m)
Tractor Horsepower*
140 – 220 HP (104 – 164 KW)
Cutting Height
45 1/2” (1.15m)
Overall Height (With HD Chute)
100” (2.54m)
Auger Diameter – Bottom
23” (58.4cm)
Auger Diameter – Top
14” (35.5cm)
Fan Diameter
38” (96.5cm)
Fan Type
5 paddle
Fan Shaft Diameter
2” (5.1cm)
Auger Drive Chain
#80
Weight
3085lbs (1400kg)
Adjust. Double Linked Chute Deflector
Standard
Hydraulic Chute Rotation Mechanism
Standard
Replaceable Blade
Standard
Adjustable Replaceable Skid Shoes
Standard
Hitch Size
Cat II & Cat III 3pt and quick hitch
PTO Speed
1000 RPM
Capacity – Dry Snow / Wet Snow
762tons/hr / 2633tons/hr
*On hydrostatically driven tractors, less HP is required than the 140-220HP recommended for conventional tractors
Schulte SDX-117 Snow Blower
- Schulte’s SDX-117 incorporates a 38” Five paddle open center cupped style fan which improves performance and is larger than most competitive designs on the market.
- On the SDX-117, a 1000 RPM gear driven drive system is standard.
- A size 8 Bondioli power shaft is included with shear pin protection to power the blower.
- A Bondioli Italian made 1 piece gearbox drives this unit.
- A heavily reinforced 23” bottom auger with formed struts ensures that hard chunks of snow and ice are fed into the fan with ease.
- A 300 degree rotating chute includes a UHMW bearing area to reduce chute freeze up.
- The new double deflector design reduces blowback when the chute deflector is placed in the down position
- Optional gauge wheels with tapered roller bearings available for highway or pavement use.
- An optional 2” x 6” cylinder for chute deflection is available.
Cutting Width
117” (2.97m)
Tractor Horsepower
140 – 220 HP (104 – 164 kW)
Cutting Height
45 1/2” (1.15m)
Overall Height
100” (2.54m) (With HD Chute)
Auger Diameter – Bottom
23” (58.4cm)
Auger Diameter – Top
14” (35.5cm)
Fan Diameter
38” (96.5cm)
Fan Type
5 paddle
Fan Shaft Diameter
2” (5.1cm)
Auger Drive Chain
#80
Weight
2750lbs (1247kg)
Adjust. Double Linked Chute Deflector
Standard
Hydraulic Chute Rotation Mechanism
Standard
Replaceable Blade
Standard
Adjustable Replaceable Skid Shoes
Standard
Hitch Size
Cat II & Cat III 3pt and quick hitch
PTO Speed
1000 RPM
Capacity – Dry Snow / Wet Snow
762tons/hr / 2394tons/hr
*On hydrostatically driven tractors, less HP is required than the 140-220HP recommended for conventional tractors.
Schulte SDX-960 Snow Blower
Previous style related to SDX-102. Two main differences: the SDX-102 has option to add 1000 rpm drive. Also the tightener is designed differently for the additional length on the SDX-960 (96″ wide) and the SDX-102 (102″ wide)
Schulte SDX-102 Snow Blower
- 102” wide cut & efficient twin stage design ideally suited to 85-140 HP tractors w/ SDX-102.
- Highly efficient 30” four paddle fan on the SDX-102 and 26” four paddle fan on the SDX-840, with an open center and cupped blades results in improved throwing distance.
- Heavily reinforced auger feeds snow to the fan and ensures that chunks of ice & hard packed snow are broken up before being discharged.
- A replaceable cutting blade & replaceable adjustable skid shoes are standard.
- A heavy duty gearbox with 1 5/8” splined shafts provides positive power delivery to the fan.
- A 300 degree rotating chute design includes a UHMW bearing area to reduce freeze up of the chute.
- Shear bolt protection for the fan and cross auger.
Cutting Width
102” (2.59m)
Tractor Horsepower
85 – 140 HP (63 – 104KW)
Cutting Height
35” (889mm)
Overall Height
96” (2.44m)
Auger Diameter
23” (584mm)
Fan Diameter
30” (762mm)
Fan Type
4 paddle
Fan Shaft Diameter
1 5/8” (41mm)
Auger Drive Chain
#80
Weight (approximate)
1675lbs (760kg)
Adjust. Double Link Chute Deflector
Standard
Hydraulic Chute Rotation Mechanism
Standard
Replaceable Blade
Standard
Adjustable Replaceable Skid Shoes
Standard
Hitch Size
Cat II, Cat II quick hitch
PTO Speed
540 RPM
Capacity – Dry snow / Wet snow
388 tons/hr / 1222 tons/hr
Schulte SDX-840 Snow Blower
- 84” wide cut & efficient twin stage design ideally suited to 55-85 HP tractors w/ SDX-840.
- Highly efficient 30” four paddle fan on the SDX-102 and 26” four paddle fan on the SDX-840, with an open center and cupped blades results in improved throwing distance.
- Heavily reinforced auger feeds snow to the fan and ensures that chunks of ice & hard packed snow are broken up before being discharged.
- A replaceable cutting blade & replaceable adjustable skid shoes are standard.
- A heavy duty gearbox with 1 5/8” splined shafts provides positive power delivery to the fan.
- A 300 degree rotating chute design includes a UHMW bearing area to reduce freeze up of the chute.
- Shear bolt protection for the fan and cross auger.
Cutting Width
84” (2.14m)
Tractor Horsepower
55 – 85 HP (41 – 63KW)
Cutting Height
30” (762mm)
Overall Height
78” (1.98m)
Auger Diameter
18” (457mm)
Fan Diameter
26” (660mm)
Fan Type
4 paddle
Fan Shaft Diameter
1 5/8” (41mm)
Auger Drive Chain
#60
Weight (approximate)
1000lbs (373kg)
Adjust. Double Link Chute Deflector
N/A
Hydraulic Chute Rotation Mechanism
Standard
Replaceable Blade
Standard
Adjustable Replaceable Skid Shoes
Standard
Hitch Size
Cat II, Cat II quick hitch
PTO Speed
540 RPM
Capacity – Dry snow / Wet snow
258 tons/hr / 810 tons/hr
Schulte FM-350 Front Mount for Snow Blower
- Enjoy the convenience, comfort and improved performance of a front mounted snow blower. No matter how much snow you need to move you will appreciate the FM-350.
- The FM-350 gives you the ability to mount your 3pt snow blower on the front of your tractor instead of on the tractor’s rear 3pt hitch.
- Better visibility and ergonomics when coupled with a Schulte Snow Blower.
- Blowing snow while driving forward, is more efficient than blowing snow in reverse.
- The FM-350 allows an increased selection of travel speeds, as your tractor has many more forward gears than reverse gears. This increased gearing selection will result in better snow blowing performance and less wear and tear on the tractor clutch, and your neck.
- The FM-350 is available without a drive train to be used with the Schulte SV series of Folding V Plows.
Tractor horsepower, maximum
250HP max
Tractor PTO
1000 RPM for SDX/RDX117 and SDX/RDX102, 540 RPM for SDX/RDX102 only
Lift capacity
5000 lbs
Adjustability
Accommodates tractors between 151” and 211” measured from front mount plate to drawbar pin
Nominal ground clearance
13” depending on tractor installation
Nominal lift range
18”
Weight
1650 lbs
Schulte SV Blade Folding V Plow
- Utilize your tractor year round, with the SV-10, SV-12, SV-14 Plow.
- Mount this blade to the Schulte FM-350, or onto the rear 3pt of your tractor.
- Use to clear RM, county or oil lease roads, village and city streets.
- Use the Scoop Mode to clear intersections quickly and efficiently.
- The “V” Mode is used to cut through very deep snow in one pass so you can get to where you need to be.
- A Schulte snow blower mounted at the rear 3pt of your tractor will provide greater traction to get you through the hardest packed snow.
- Get your Schulte Snow Removal Products working together to save time and money!
- The SV Plow is available in 10’, 12’ and 14’ widths.
- Fits Cat 2, 3, 3N 3pt hitches and Cat 2 and 3 quick-hitches.
- The SV-10, SV-12, SV-14 Plow works great with the Schulte FM-350.
- Our front 3-point hitch mounting system with optional PTO drive.
- Hydraulic accumulators reduce shock loading.
- Two independently controlled sections angle up to 30 degrees forward or backward.
- Clearing modes for the SV-10, SV-12 & SV-14 include Full Angle Mode, SV Mode & Scoop Mode and anywhere in between.
Width SV-10
10’ (3.04 m)
Width SV-12
12’ (3.66 m)
Width SV-14
14’ (4.27 m)
Weight (Approx.) SV-10
2400 lbs (1088 kg)
Weight (Approx.) SV-12
2550 lbs (1156 kg)
Weight (Approx.) SV-14
2700 lbs (1224 kg)
Horsepower recommended SV-10
65-125 hp (48 kw – 93 kw)
Horsepower recommended SV-12
100-200 hp (74 kw – 149 kw)
Horsepower recommended SV-14
150-200 hp (112 kw – 149 kw)
Transport Width SV-10
8’ 8” (2.64 m)
Transport Width SV-12
10’ 5” (3.17 m)
Transport Width SV-14
12’ 2”’ (3.71 m)
Moldboard Height (with cutting blade)
38″ (.97 m)
Snow Deflector Shield Height
24″ (.61 m)
Total Height With Snow Deflector Shield
62″ (1.58 m)